CHCXB - II 70T-12H4, DUAL SHIELD MILD STEEL, T-1, (SUPDAT)
- MSDS: CHCXB
- Manufacturer: ESAB GROUP INC
- Product Name: II 70T-12H4, DUAL SHIELD MILD STEEL, T-1, (SUPDAT)
- National Stock Number: 3439-00N085791
Product Identification
Product ID:II 70T-12H4, DUAL SHIELD MILD STEEL, T-1, (SUPDAT)
MSDS Date:11/21/1997
FSC:3439
NIIN:00N085791
MSDS Number: CHCXB
Responsible Party
HANOVER, PA 17331
US
Emergency Phone: 717-637-8911
Info Phone: 717-637-8911
Cage: HO829
Contractor
Telephone: 717-637-8911
Cage: HO829
Ingredients
MANGANESE (SARA 313)
CAS: 7439-96-5
RTECS: OO9275000
Fraction By Weight: 2-3%
OSHA PEL 5 MG/M3 DUST, C
ACGIH TLV: 5 MG/M3 DUST
SODIUM FLUOROALUMINATE; (CRYOLITE)
CAS: 15096-52-3
RTECS: WA9625000
OSHA PEL N/K
ACGIH TLV: N/K
CALCIUM FLUORIDE; (FLUORSPAR)
CAS: 7789-75-5
RTECS: EW1760000
OSHA PEL N/K
ACGIH TLV: N/K
POTASSIUM FLUOROSILICATE; (POTASSIUM SILICA FLUORIDE)
CAS: 16871-90-2
RTECS: VV8400000
OSHA PEL N/K
ACGIH TLV: N/K
SODIUM FLUORIDE (CERCLA)
CAS: 7681-49-4
RTECS: WB0350000
OSHA PEL 2.5 PPM (F)
ACGIH TLV: 2.5 MG/M3 (F)
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
SILICON; (SI & SIO*2)
CAS: 7440-21-3
RTECS: VW0400000
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST
TITANIUM OXIDE; (TITANIUM DIOXIDE)
CAS: 13463-67-7
RTECS: XR2275000
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST
MAGNESIUM OXIDE; (MAGNESIUM)
CAS: 1309-48-4
RTECS: OM3850000
OSHA PEL 15 MG/M3 PARTICULATE
ACGIH TLV: 10 MG/M3 FUME
IRON
CAS: 7439-89-6
RTECS: NO4565500
OSHA PEL N/K
ACGIH TLV: N/K
PROCESS, PROCS & CONSUMABLES USED.
RTECS: 9999999ZZ
OF OXIDES & FLUORIDES OF MATLS LISTED AS WELL AS
RTECS: 9999999ZZ
(REFER TO "CHARACT OF ARC WELDING FUME" FROM AWS).
RTECS: 9999999ZZ
LIM FOR WELDING FUMES OF 5MG/M3 REACHED. ONLY WAY TO
RTECS: 9999999ZZ
ANALYSIS. COMPOSITION & QTY OF FUMES & GASES TO
RTECS: 9999999ZZ
OBTAINED INSIDE WELDER'S HELMET, IF WORN, OR IN
RTECS: 9999999ZZ
AIRBORNE PARTICLES GENERATED BY WELDING & ALLIED
RTECS: 9999999ZZ
AREAS ON CHEST X-RAYS. SEVERITY OF CHG IS
RTECS: 9999999ZZ
NECESSARILY ASSOC W/SYMPS OR SIGNS OF REDUCED LUNG
RTECS: 9999999ZZ
NON-WORK FACTORS SUCH AS SMKNG, ETC. OVEREXP TO
RTECS: 9999999ZZ
SLEEPINESS, MUSC WEAK, EMOTIONAL DISTURBS & SPASTIC
RTECS: 9999999ZZ
DETECTABLE PULSE, BEGIN CPR. IMMED CALL MD.
RTECS: 9999999ZZ
& FULL LENGTH FACESHIELD W/FILTER LENS. AS RULE
RTECS: 9999999ZZ
ZONE. THEN GO TO NEXT LIGHTER SHADE WHICH GIVES
RTECS: 9999999ZZ
FLASH GOGGLES, IF NECESSARY, TO SHIELD OTHERS.
RTECS: 9999999ZZ
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ELEC ARC WORK MAY CREATE ONE/MORE OF
FOLLOWING HLTH/PHYSICAL HAZS. FUMES & GASES CAN BE DANGEROUS TO
HLTH. ELEC SHOCK CAN KILL. ARC RAYS CAN INJURE EYES & BURN SKIN.
NOISE CAN DMG HEARING. EFTS OF ACU TE OVEREXP TO GASES, FUMES &
DUST MAY CAUSE IRRIT OF EYES, LUNGS, NOSE & THROAT. SOME TOX GASES
ASSOC (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: W/WELDING MAY CAUSE PULM EDEMA, ASPHY
& DEATH. ACUTE OVEREXP MAY INCL SIGNS & SYMPS SUCH AS WATERY EYES,
NOSE & THROAT IRRIT, HDCH, DIZZ, DFCLTY BRTHG, FREQUENT COUGH OR
CHEST PAIN. CHRONIC: EFTS OF CHRONIC OVEREXP TO AIR CONTAMINANTS
MAY LEAD TO THEIR ACCUM IN LUNGS, CNDTN WHICH MAY BE SEEN AS DENSE
(ING 17)
Medical Cond Aggravated by Exposure:INDIVIDUALS W/ALLERGIES OR IMPAIRED
RESP FUNC MAY HAVE SYMPS WORSENED BY EXPOS TO WELDING FUMES.
HOWEVER, SUCH REACTION CANNOT BE PREDICTED DUE TO THE VARIATION IN
COMPOSITION & QTY OF DECOMP PRODS.
First Aid
First Aid:INGEST:CALL MD IMMED . EYES:IMMED FLUSH W/POTABLE WATER FOR
AT LST 15 MIN, SEEK ASSISTANCE FROM MD . SKIN:FLUSH W/COPIOUS AMTS
OF WATER. CALL MD. IN CASE OF EMER CALL FOR MED AID. EM PLOY FIRST
AID TECHNIQUE REC BY RED CROSS. INHAL:IF BRTHG DFCLT, GIVE OXYG &
CALL MD. FOR ELEC SHOCK, DISCONNECT & TURN OFF POWER. IF NOT BRTHG
BEGIN ARTF RESP, PREF MOUTH-TO-MOUTH. IF NO (ING 21)
Fire Fighting
Extinguishing Media:USE EXTINGUISHING MEDIA RECOMMENDED FOR BURNING
MATERIALS AND FIRE SITUATION.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA AND FULL PROTECTIVE
EQUIPMENT . ONLY PACKAGING FOR THIS PRODUCT WILL BURN.
Unusual Fire/Explosion Hazard:PROD WILL NOT BURN. HOWEVER, WELDING ARCS
& SPKS CAN IGNIT COMBUST & FLAM MATLS. SEE ANSI Z49.1 "SFTY IN
WELDING & CUTTING" & "SAFE PRACTICES" CODE:SP, (SUPDAT)
Accidental Release
Spill Release Procedures:NOT APPLICABLE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:READ AND UNDERSTAND MANUFACTURER'S
INSTRUCTIONS & PRECAUTIONARY LABEL ON THIS PRODUCT.
Other Precautions:SEE ANSI Z-49.1 "SAFETY IN WELDING & CUTTING" PUB BY
AWS & OSHA PUB 2206 (29 CFR 1910) FOR MORE DETAILS ON HNDLG & USE.
TRAIN WELDER TO KEEP HEAD OUT OF FUMES. TRAIN WELDER NOT TO TOUCH
LIVE ELEC PART S & TO INSULATE SELF FROM WORK & GROUND.
Exposure Controls
Respiratory Protection:USE NIOSH APPROVED RESPIRABLE FUME RESPIRATOR OR
AIR SUPPLIED RESPIRATOR WHEN WELDING IN CONFINED SPACE OR WHERE
LOCAL EXHAUST OR VENTILATION DOES NOT KEEP EXPOSURE BELOW TLV.
Ventilation:USE ENOUGH VENT, LOC EXHST AT ARC OR BOTH TO KEEP FUMES &
GASES BELOW TLV IN WORKER'S BRTHG ZONE & GENERAL AREA.
Protective Gloves:WELDER'S GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGS (ING 22)
Other Protective Equipment:ANSI APPRVD EYE WASH & DELUGE SHOWER . MAY
INCL ARM PROTECTOR, APRON, HAT, SHOULDER PROT & DARK SUBSTANTIAL
CLTHG.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
MFR'S TRADE NAME/PART NO: T-2, T-9 & T-12 FLUX CORED WELDING
ELECTRODES. EXPLO HAZ: PUB BY AWS, PO BOX 351040, MIAMI, FL 33135 &
NFPA 51B "CUTTING & WELDING PROCESS" PUB BY NFPA, BATTERYMARCH
PARK, QU INCY, MA 02269 FOR ADDNL FIRE PREVENTION & PROT INFO.
Chemical Properties
Appearance and Odor:TUBULAR STEEL WIRE CONTAINING MINERALS AND ALLOYS;
ODORLESS.
Stability
Stability Indicator/Materials to Avoid:YES
NONE CURRENTLY KNOWN.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:WELDING FUMES & GASES CANNOT BE
CLASSIFIED SIMPLY. COMPOSITION & QTY OF BOTH DEPEND ON MATL BEING
WORKED, (ING 10)
Disposal
Waste Disposal Methods:PREVENT WASTE FROM CONTAMINATING SURROUNDING
ENVIRONMENT. DISCARD ANY PRODUCT, RESIDUE, DISPOSABLE CONTAINER OR
LINER IN AN ENVIRONMETNALLY ACCEPTABLE MANNER IN FULL COMPLIANCE
WITH FEDERAL, STATE AND LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.